How is the workmanship of the Clean Factory C Factory Rolex Daytona v2? Can it surpass the N Factory Daytona

First of all, the editor has introduced the details of the factory C before. The full name is Clean Factory. It was actually called ZZ Factory before. It is a manufacturer that specializes in providing bezel accessories for the market. The big factories in the market basically use their bezel accessories. This is also the foundation for Factory C to gain a foothold. Later, it was renamed Clean Factory Factory C. It also made its own molds for replica watches, not just providing accessories for replica big factories.

A manufacturer that can replicate Daytona must be powerful. This can be seen from the earliest time when Factory C made accessories. After successfully taking over the technology of Factory AR and Factory N, it has become the most worthwhile one to start with. The shell is made by Factory AR, which is the best in the market. The movement is 4130, which is a one-to-one replica of the original. It has powerful functions, stable movement, and a very low return rate. In my personal opinion, the Rolex of Factory C has successfully taken up the banner of replica Rolex, and it is not inferior to Factory N or Factory VS now, but the manufacturer’s shipment is relatively slow. At present, the C factory Daytona has been upgraded to the current v2 version in order to better cater to the preferences of customers. Let’s take a look at the official copy of the C factory and what has been upgraded!
Is the Clean factory C factory Rolex Daytona worth buying?

The C factory Rolex Daytona uses 904L material, 4130 movement/the same movement of the N factory, clean dial, clean ceramic bezel buff factory pointer, thickness between 12.2-12.3, the place where the glass and the case meet is completely transparent, and no white edge can be seen. The arc of the glass edge is consistent with the original, and the height of the glass protruding from the ceramic bezel is the same as the original. The ceramic bezel uses clean fonts that are more three-dimensional and rounded. The edge of the ceramic bezel has a slight rounded corner, and the word pins have rounded corners. The luminous filling height is moderate, and the brightness is also ok. The font is printed three-dimensionally, the size of the small black circle is consistent with the original, and the top of the place where it meets the case is seamlessly connected. At the sharp corners, the strap/case is matched with the seamless strap/case and the head grain. The top is level with the case, and the tail is slightly concave. Judging from the manufacturer’s copywriting, this C-factory Daytona has top-notch workmanship and is currently a ceiling-level product. It is worth buying for watch friends who like Daytona to detoxify!
What has been upgraded in the v2 version of the Clean Factory C-factory Rolex Daytona
The clean factory has also upgraded the Daytona to version v2, mainly changing the Panda Di dial, changing the text to warm white, changing the hands to low feet, synchronizing the luminous filling with the dial color, and correcting the first three points to an arc arrangement.
How is the workmanship of the Clean Factory C-factory Rolex Daytona, surpassing the workmanship of the N factory

First, we can see the overall appearance. The dial color has been improved from the previous cold white to the milky white of the original version, which is a major upgrade point. In terms of size, the same as before, the thickness is 12.2mm. In terms of diameter, the diameter of the ceramic bezel is 38.5mm, the data is the same as the original, and it can be interchanged with the original. In terms of weight, it is 138 grams, which is not much different from the original. After tearing off the film, the thickness is 12.2 mm, which is the same as the original. So there is no need to sink the mirror, the factory has already sunk the mirror, and the height is the same as the original, so the thickness of the whole watch is 12.2mm, which is also consistent.

As before, it uses sapphire glass mirror, ceramic outer ring, 904L stainless steel case and strap. The brushed and polished buckle of the strap has a large opening, and the Rolex Daytona also has chamfered grinding and buckle coding. All the details of Factory C are actually the same as the most famous strap of AR, so there is no need to upgrade the steel strap of AR. They are all the strongest in the industry!

Zoom in several times to see the details of the dial. The font printing is also more three-dimensional. The scale nails are all rounded and polished, and the overall look is very textured, especially when the light hits it. The three small dial hands have been upgraded. The center axis is closer to the original one than before, and the needle craftsmanship is also different from before. The two sides are a little downward, that is, there is an arc, and the three-dimensional sense will be stronger. The picture can’t show the effect, but the real object can be seen.

This white face has no color difference, and the size of the three small circles inside is the same as the original. The luminous filling of the dial is aligned with the plate, and the center axis is solid. The middle is not empty to the bottom. The tail end of the pointer is sharper and aligned with the plate, which is thicker. It is not like the iron sheet of the N factory (that is, it is relatively thin, and the edge is very rough and has many burrs). The C factory will not have burrs, so the quality control of the entire dial will be much better than that of the N factory, including the edge of the mirror is also more transparent, no longer the kind with a circle of white edges.

The luminous filling of the scale has also been improved from the previous light pink to the light green of the plate, and the color is the same as the filling of the hour and minute hands.

As for the case, it is made of 904L stainless steel as before, and the crown has been revised on the details of the previous version. Previously, the three dots under the crown were on the same horizontal line, but this time the Panda Di in the V2 version was revised to a semi-arc, that is, no longer on the same horizontal line.

The sticker on the back cover is now SpongeBob in the V2 version, and it was Patrick and SpongeBob before. The movement inside is still the self-produced Dandong 4130 movement that we are very familiar with. These are from the same factory as the one in the N factory, and the stability is the same, but there is a little difference. What is the difference? The movement engraving will be a little different. The N factory has already put the Rolex logo before leaving the factory, and the engraving will be lighter. The C factory is engraved later. The movement is blank when it comes back, without any engraving. This one is engraved by the C factory later, so its engraving will be a little deeper and thicker. This movement is very stable and durable. Factory N has launched it for three years, and the repair rate is really very low. It can be compared with the original movement, with stable travel time and small error. It is really good!

In summary, the biggest upgrade point of the CLEAN factory Panda Di is the dial color. Watch friends who were previously entangled in the dial color can boldly buy it. There is no doubt that the C factory is a top-end version, which is indeed the ceiling level. If you want to buy it, you don’t have to choose Factory N now, Factory C can let you have fun.

en_USEnglish
Scroll to Top